The vacuum is one of the most significant technological breakthroughs of the 21st century. The shark vacuum is the most popular of all these vacuum models. A vacuum cleaner is a great tool to clean the large floors in your home. A vacuum cleaner is a quicker way to clean the house, especially with today’s pandemic.
Of course, we all do.
It can be frustrating when your Shark vacuum cleaner malfunctions. The indicator light for the shark vacuum brush roll is not on.
Shark vacuums have a light indicator that is crucial. It not only indicates if the vacuum has been turned on but also shows the current vacuum condition.
This is why we wrote this article today to help you solve your problem. You’ll also find important information like how to maintain your Shark vacuum cleaner.
Ready… 3,2,1… on!
Several reasons your Shark Vacuum Roll Indicator Light might not be on
The failure of the indicator light for Shark vacuum brush rolls is a sign that there may be a more severe problem. Two power belts drive the brush roll designed to remove dirt and carpet dust. These power belts, or channels, feed two different light colors.
The red light means the roll has become clogged with materials and cannot be turned. The green light on the other side indicates that the brush roll runs sound.
Imagine the light not being on. This would be highly frustrating since operating the Shark professional vacuum with the lights off could only worsen the problem below.
These possible reasons your vacuum indicator light may not be on are essential to look out for
Broken Brush Roll Channel
A broken brush roll belt/channel is one of the most common reasons the light does not turn on.
Two belts line the brush roll, which connects directly to two light bulb indicators.
Even if one channel has problems such as loose placement or grounded lines, the entire light-indicator channel will likely not light on.
Here are some things you can do best:
- Ask for help from Shark repair specialists.
- Repair the broken belt or channel if it is found to cause the problem.
- Purchase a Shark vacuum belt replacement if the damage is severe. See our Shark vacuum warranty deals.
Change to the Wrong Position
A Shark vacuum brush roll indicator light that is not on does NOT always mean damage. Sometimes it is just a matter of placing the switch correctly.
Follow these steps:
- You can see its two mode switches, “I” and “II.”
- The “I” mode switch prepares for the suction power. It’s still not entirely switched on until the brush roll begins running.
- The “II mode switch” now gives the brush roll its full power.
- You will need to check that the mode is in the correct position.
Overly Blocked with Roll Brush
If the brush roll is entirely blocked with the matter, it will turn a light red color. What if the brush roll doesn’t turn on? It could be that the roll is too obstructed for its power to move.
Let’s clear the blockage!
- Please turn off your Shark vacuum professional and unplug it.
- Place the vacuum on something solid and flat.
- Remove the brush roll.
- Use a brush to remove any blockages along the length of your roll.
- It is possible to turn it off and check if there is light.
The vacuum that has been heated
An overheated device is the main reason your Shark vacuum brush roller indicator light does not turn on.
Here are some ways you can provide relief.
- If you notice any changes in the performance of your vacuum, such as a reduced motor sound, vacuuming speed or lights flickering, turn off the vacuum and unplug it immediately.
- To remove the dust from the vacuum, place it on the ground.
- Use a nylon-bristled toothbrush to clear the HEPA filter and bin from blockages.
- It would help if you did not turn the vacuum on again until after 40-45 minutes.
Any of the above factors should not cause shark vacuum brush light.
These issues need to be addressed to troubleshoot the brush roll light issue. Let’s talk about how to clean the Shark vacuum to fix maintenance-related issues.
How to clean and maintain the shark vacuum
Shark Professional vacuums are truly outstanding vacuum technology. It holds the record for being the most durable vacuum in the last three years. However, it still needs to be cleaned and maintained correctly.
You can clean the vacuum, and it will still work. The Shark vacuum may still have minor mechanical issues despite its impeccable record. It is important to remember this cleaning procedure to avoid future problems.
There are many reasons to learn how to clean a Shark vacuum. You can fix most technical problems, including losing power and suction or smelling funny.
Even the most powerful vacuum cleaners require some maintenance and cleaning. Real Homes loves this brand, but that doesn’t make them invincible. We asked experts to give us a tutorial on maintaining your device. This includes cleaning the canister and how you clean a Shark vacuum filter.
These are the steps to clean your Shark vacuum.
Step 1. Prepare the tools.
These are the tools that you will need to prepare for pre-cleaning.
- Soft brush
- Dry and clean your cloth
- Pair of scissors
- Dishwashing soap or detergent soap
- Water (preferably at a higher temperature than average)
Step 2. Dismantle the vacuum
- Turn off the vacuum, and then unplug it (if necessary, learn how to reset the shark vacuum).
- Remove the filter, bin, and hose.
Step 3. Inspect the vacuum.
- Examine every possible obstruction.
- To remove any matter, use a brush.
- You can always cut with scissors if the matter is too complicated.
- After clearing the area, use a clean, dry cloth to wipe it down.
Step 4. Clean the bin and empty it.
- Twist the bin to open both ends.
- Place the bin on top of a container, then pour the contents.
- Use warm water to wash the bin. Use soap.
- To clear the bin, use a brush with a long handle to brush the area.
- Use water to wash off the soap.
- Use a clean cloth to wipe the bin’s interior.
- Set the bin aside for drying.
Step 5. Clear the filters.
- Pull out the HEPA filter by opening the filter door. Pull hard.
- Use warm water to clean the filter.
- Allow the filter to dry completely.
The foam filter is here:
- The foam filter should be held firmly but not too hard. It is essential not to break the filter.
- Please keep it in cool water.
- Make sure to wash your hands well.
- Be sure to brush the foam well, but not too hard.
- Use soap.
- Wash once more.
- Dry with a clean cloth.
- The shark vacuum front filter may blow off if it is still damp.
Step 6. Clear blockages from the brush roll.
- To check the underside of the brush head, remove it from the handle and place it on the ground.
- Slowly remove the brush roll from its box.
- To contain dust particles, place them in a trash can.
- The brush roll should be pulled just enough to loosen the case but not enough to remove it altogether.
- Remove any blockages. If necessary, use scissors to cut.
- After cleaning, lock the brush roll. The brush roll should make a clicking sound when it is locked.
Step 7. Clear blockages from the brush roll.
- Verify that there is no wiring in the hose housings.
- If there is none, remove it.
- You can fill the hose’s interior with water and soap.
- To see clearly, pour the water out.
- To clean the belly of your hose, use a long brush or any other cloth.
- To prevent clogging, make sure you remove all debris after cleaning.
- Wash once more.
- To dry the hose overnight, hang it.
- When dry, reattach the vacuum parts.
Please continue reading to hear our conclusion…
Recommend: shark navigator lift-away nv352
User reviews have rated the Shark Navigator Lift away as favorable. Many were impressed by the Brush roll’s strong suction power and quick performance. Users with back problems loved the Brush roll switch, which was used to change from hard floors to carpet.
Others mentioned the large selection of premium accessories, mainly the brush tool that removed hair from pets and humans in minutes. The power cord was shorter, and some users complained that the head wouldn’t fit under their low beds or couches. These minor issues did not affect the overall performance.
The indicator light on the Shark vacuum brush roll does not indicate a more severe problem. Sometimes it’s more serious than others. Other times it’s more mundane. One thing is sure: Shark vacuums, regardless of their solid packaging, require regular maintenance via cleaning.
One-time cleanings would be sufficient. After doing all the cleaning, the Shark vacuum deserves all that.
Do you now see the light turn off? This could be interpreted as:
- It’s got a broken belt/channel
- It is in an incorrect position
- Its roll brush is too blocked
- Oder it could be overheated.
Hurry! You can quickly inspect it to identify the problem.
You can also read How to change a Bissell vacuum belt?